-
Automatic C/Z purlin roll forming machine
Automatic C/Z purlin roll forming machine for producing C and Z shaped purlins.
Sizes range: Width 80-300 mm, flange 25-80 mm, thickness 0.8-3.0 mm -
UV Inject Printer
Printing Material: sheet, carton, pipe, metal, plastic, etc.
Print Content: Chinese, English, Numbers, Pictures, etc.
Languages: Chinese, English, Spanish, French, etc.
Buy Separately: Ink box -
Double layer roof sheet forming machine
This is double layer roof sheet forming machine,can produce 2 different kinds of roof sheets,double layer can save the space,high speed and high precision. -
Electrical Enclosure roll forming machine
Decoiler
Coils width: ≤462mm;
Material thickness 0.6mm;
Material roll inner diameter: ≥φ450mm;
Max.OD Coil: φ1200mm; Weight: ≤3T; Spindle center height: 650mm
Land size (length x width) 1200x1000mm
Traction and Leveling machine
Number of work rolls: 11 rolls leveling
It consists of a pinch roller and a leveling roller. The pinch roller can be adjusted individually. The feeding end of the
leveling machine is equipped with a pair of guiding flat rollers and two pairs of guiding vertical rollers. The guiding vertical
rollers can move in the center and move at the same time.
Diameter of leveling roller: 60MM
Distance between leveling rollers: 65MM
NCF-500 Servo Feeder
Function: Measure the length of the workpiece and work requirements for traction, feeding and stamping.
Structural features: Two pairs of traction rollers, traction roller reduction adjustment device, frame, servo motor, etc.;
Servo motor control: Fixed-length feeding;
LCD touch screen: easy to change and set various technical parameters.
Parameter:
(1) The maximum passing width of the sheet is 462mm
(2) Feeding method: Servo feeding
(3) Feeding times according to punching times
Punching system
1. Composed of 4 hydraulic punching machine
2. Component:Base, hydraulic pressure device, hydraulic system, etc.;
3. Parameter: (1) Rated pressure 16Mpa-25 Mpa
(2) Power 7.5KW
4. Function: Complete the logo and hook/cut angle of 2F board.
Complete the logo and hook/cut blanking of the 1F board to provide a sheet for the single hand plug forming.
Roll forming machine
Machine 1 for Fundo F2: Torii through shaft
structure + cantilevered host structure; Complete continuous feeding molding.
Machine 2 for Fundo F1: Torii through shaft structure + cantilevered host structure; Complete single-sheet hand plug feeding
forming.
Structure: Quick-change type adjustment mechanism. The bed adopts welded structure and stress relief treatment; the gear adopts 45
steel hard tooth surface;
High strength, high hardness, high precision, high service life.
Parameters:
(1) Raw material thickness 0.6mm (when σs≤260Mpa)
(2) Raw material width ≤462mm (adjustable)
(3) Forming passes: Forming machine ①: 17 passes; Forming machine ②: 12 passes
(4) Motor power 5.5kw, frequency conversion motor
(5) Transmission mode Gear transmission
(6) Rolling mill speed 0-12m/min
(7) Roll material Cr12 quenched HRC56°-60°
Automatic Hydraulic track cutting machine
Function: Automatically cut and bend the cold-formed profile on-line according to the size requirements.
Stucture:
Cutting head: Cylinder, top plate, column, base plate.
Machine body: Plates, wheels, axles, frame bodies, buffers, base beams, etc.
Parameters:
(1) Maximum cut section (length×width) 433×16mm
(2) Land size (length×width): 1000mm×800mm
(3) Hydraulic power: 4kw
Receiving table
Structure: roller type, no power; composed of bed, support, roller shaft,
Electrical control system
The whole line adopts PLC control, LCD touch
screen, man-machine interface.
Function:
(1) Digital setting of part length.
(2) The length of the parts can be adjusted.
(3) Real-time monitoring of equipment operating status and fault indication.
There are two modes of operation: manual/automatic
In the manual state, it can be operated as a stand-alone machine, which is convenient for maintenance; in the automatic state, the
whole line of production operation is carried out, and the sequence starts
Emergency stop buttons on the whole line, which are easy to handle emergency accidents and ensure the safety of equipment and
operators -
Electric cabinet column equipment
Parameters:
(1) Raw material thickness 0.6mm (when σs≤260Mpa)
(2) Raw material width ≤462mm (adjustable)
(3) Forming passes: Forming machine ①: 17 passes; Forming machine ②: 12 passes
(4) Motor power 5.5kw, frequency conversion motor
(5) Transmission mode Gear transmission
(6) Rolling mill speed 0-12m/min
(7) Roll material Cr12 quenched HRC56°-60°
Automatic Hydraulic track cutting machine
Function: Automatically cut and bend the cold-formed profile on-line according to the size requirements.
Stucture:
Cutting head: Cylinder, top plate, column, base plate.
Machine body: Plates, wheels, axles, frame bodies, buffers, base beams, etc.
Parameters:
(1) Maximum cut section (length×width) 433×16mm
(2) Land size (length×width): 1000mm×800mm
(3) Hydraulic power: 4kw
Receiving table
Structure: roller type, no power; composed of bed, support, roller shaft,
Electrical control system
The whole line adopts PLC control, LCD touch
screen, man-machine interface.
Function:
(1) Digital setting of part length.
(2) The length of the parts can be adjusted.
(3) Real-time monitoring of equipment operating status and fault indication.
There are two modes of operation: manual/automatic
In the manual state, it can be operated as a stand-alone machine, which is convenient for maintenance; in the automatic state, the
whole line of production operation is carried out, and the sequence starts
Emergency stop buttons on the whole line, which are easy to handle emergency accidents and ensure the safety of equipment and
operators
-
Aluminum Diamond Plate Ice Cooler Box making machine
1.1 GB/T6725-2002 "Technical Specification for Cold-Formed Thin-Wall Section Steel"
1.2 GB/T6728-200 "Dimensions, appearance, weight and allowable deviations of cold-formed hollow steel for structure"
1.3 GB6723-86 "Dimension, shape, weight and allowable deviation of general cold-formed open steel"
1.4 GB/709-88 "The size, shape, weight and allowable deviation of hot-rolled steel plates and strips"
1.5 GB/708-88 "Dimensions, Shapes, Weights and Permissible Deviations of Cold Rolled Steel Plates and Strips"
2.Basic equipment production conditions
2.1 Equipment production conditions:
2.1.1 Equipment area: 23.5×2.5×3 (length×width×height) meters
2.1.2 Equipment feeding direction: left in and right out.
2.1.3 Voltage parameters: 220V, 50Hz, 3 phases.
2.1.4 Air source: flow rate is 0.5m³/Min; pressure is 0.7MPa.
2.1.5 Hydraulic oil: 46# hydraulic oil.
2.1.6 Gear oil: 18# hyperbolic gear oil.
2.2 Equipment overview:
2.2.1 Meet the additional requirements of cold bending of profiles, the requirements of online stamping and cut-to-length cutting
2.2.2Working system: Three shifts can work continuously, and the working hours of each shift are 7.5x3=22.5 hours -
Electronic Equipment Radiator Enclosure forming machine
Decoiler
Coils width: ≤462mm;
Material thickness 0.6mm;
Material roll inner diameter: ≥φ450mm;
Max.OD Coil: φ1200mm; Weight: ≤3T; Spindle center height: 650mm
Land size (length x width) 1200x1000mm
Traction and Leveling machine
Number of work rolls: 11 rolls leveling
It consists of a pinch roller and a leveling roller. The pinch roller can be adjusted individually. The feeding end of the
leveling machine is equipped with a pair of guiding flat rollers and two pairs of guiding vertical rollers. The guiding vertical
rollers can move in the center and move at the same time.
Diameter of leveling roller: 60MM
Distance between leveling rollers: 65MM
NCF-500 Servo Feeder
Function: Measure the length of the workpiece and work requirements for traction, feeding and stamping.
Structural features: Two pairs of traction rollers, traction roller reduction adjustment device, frame, servo motor, etc.;
Servo motor control: Fixed-length feeding;
LCD touch screen: easy to change and set various technical parameters. -
Electrical Power Distribution Equipment
Decoiler
Coils width: ≤462mm;
Material thickness 0.6mm;
Material roll inner diameter: ≥φ450mm;
Max.OD Coil: φ1200mm; Weight: ≤3T; Spindle center height: 650mm
Land size (length x width) 1200x1000mm
Traction and Leveling machine
Number of work rolls: 11 rolls leveling
It consists of a pinch roller and a leveling roller. The pinch roller can be adjusted individually. The feeding end of the
leveling machine is equipped with a pair of guiding flat rollers and two pairs of guiding vertical rollers. The guiding vertical
rollers can move in the center and move at the same time.
Diameter of leveling roller: 60MM
Distance between leveling rollers: 65MM
NCF-500 Servo Feeder
Function: Measure the length of the workpiece and work requirements for traction, feeding and stamping.
Structural features: Two pairs of traction rollers, traction roller reduction adjustment device, frame, servo motor, etc.;
Servo motor control: Fixed-length feeding;
LCD touch screen: easy to change and set various technical parameters.
Parameter:
(1) The maximum passing width of the sheet is 462mm
(2) Feeding method: Servo feeding
(3) Feeding times according to punching times
Punching system
1. Composed of 4 hydraulic punching machine
2. Component:Base, hydraulic pressure device, hydraulic system, etc.;
3. Parameter: (1) Rated pressure 16Mpa-25 Mpa
(2) Power 7.5KW
4. Function: Complete the logo and hook/cut angle of 2F board.
Complete the logo and hook/cut blanking of the 1F board to provide a sheet for the single hand plug forming.
Roll forming machine
Machine 1 for Fundo F2: Torii through shaft
structure + cantilevered host structure; Complete continuous feeding molding.
Machine 2 for Fundo F1: Torii through shaft structure + cantilevered host structure; Complete single-sheet hand plug feeding
forming.
Structure: Quick-change type adjustment mechanism. The bed adopts welded structure and stress relief treatment; the gear adopts 45
steel hard tooth surface;
High strength, high hardness, high precision, high service life.
Parameters:
(1) Raw material thickness 0.6mm (when σs≤260Mpa)
(2) Raw material width ≤462mm (adjustable)
(3) Forming passes: Forming machine ①: 17 passes; Forming machine ②: 12 passes
(4) Motor power 5.5kw, frequency conversion motor
(5) Transmission mode Gear transmission
(6) Rolling mill speed 0-12m/min
(7) Roll material Cr12 quenched HRC56°-60°
Automatic Hydraulic track cutting machine
Function: Automatically cut and bend the cold-formed profile on-line according to the size requirements.
Stucture:
Cutting head: Cylinder, top plate, column, base plate.
Machine body: Plates, wheels, axles, frame bodies, buffers, base beams, etc.
Parameters:
(1) Maximum cut section (length×width) 433×16mm
(2) Land size (length×width): 1000mm×800mm
(3) Hydraulic power: 4kw
Receiving table
Structure: roller type, no power; composed of bed, support, roller shaft,
Electrical control system
The whole line adopts PLC control, LCD touch
screen, man-machine interface.
Function:
(1) Digital setting of part length.
(2) The length of the parts can be adjusted.
(3) Real-time monitoring of equipment operating status and fault indication.
There are two modes of operation: manual/automatic
In the manual state, it can be operated as a stand-alone machine, which is convenient for maintenance; in the automatic state, the
whole line of production operation is carried out, and the sequence starts
Emergency stop buttons on the whole line, which are easy to handle emergency accidents and ensure the safety of equipment and
operators
-
Trinity Industries Guardrail Roll Forming Machine
Basic Info Warranty:12 Months Delivery Time:30 Days After Service:Engineers Available To Service Machinery Overseas Type:Steel Frame & Purlin Machine Material:GI, PPGI, Aluminum Coils Cutting Mode:Hydraulic Forming Speed:25-30m/min(excluding Punching) Voltage:380V/3Phase/50Hz Or At Your Request Way Of Driven:Chain Or Gear Box Material Of Cutting Blade:Cr12 Additional Info Packaging:NUDE Productivity:200 sets/year Brand:YY Transportation:Ocean Place of Origin:Hebei Supply Ability:200... -
Quick Changeable C/Z Purlin Roll Forming Machine
Basic Info Model No.:YY–CZP–002 Type:Roof Sheet Roll Forming Machine Warranty:12 Months Delivery Time:30 Days Material:Steel Coil, Galvanized, PPGI, Aluminum Speed:6-8m/min(including Punching And Cutting Time) Control System:Panasonic/Mitsubishi PLC Way Of Driven:Chain Transmission Cutting Mode:Hydraulic Material Of Cutting Blade:Cr12 Voltage:At Customer’s Request Additional Info Packaging:PLASTIC FILM, WOODEN CASE Productivity:200 sets/year Brand:YY Transportation:Ocean,Lan... -
Zinc Steel Angle roll forming machine
Basic Info Model No.:YY–SAM—004 Condition:New Customized:Customized Automatic Grade:Automatic Structure:Other Transmission Method:Machinery Control System:PLC Material Of Roller:Cr12mov Main Power:15kw Speed:25m/min Transmission:Gear Box Hydraulic Power:11KW Cut Type:Servo Hydraulic Cutting Thickness:1.0-2.5 Mm Additional Info Packaging:Naked Productivity:200 sets/year Brand:YINGYEE Transportation:Ocean Place of Origin:China Supply Ability:200 sets/year Certificate:ISO9001 ... -
Iron Angle roll forming machine
Basic Info Model No.:YY—SAM—004 Condition:New Customized:Customized Automatic Grade:Automatic Structure:Other Transmission Method:Machinery Control System:PLC Material Of Roller:Cr12mov Main Power:15kw Speed:25m/min Transmission:Gear Box Hydraulic Power:11KW Cut Type:Servo Hydraulic Cutting Thickness:1.0-2.5 Mm Additional Info Packaging:Naked Productivity:200 sets/year Brand:YINGYEE Transportation:Ocean Place of Origin:China Supply Ability:200 sets/year Certificate:ISO9001 ...