T he technical flow of the Slitting line:
Coil car and storage→ Uncoiler→shovel board device → Flattening → Shear the ends →Centering device→Disc shear Slitter→Rewinder → Platform →Locating expanding set→Recoiler→Active support,hold down arm and table→Discharge Coil car
Raw Material Feeding | CR Coil, Galvanized steel, HR coil |
Material Tensile Strength | Max 550MPa |
Material Yield Strength | Max 235MPa |
Coil OD | 1100mm to 2000mm |
Coil ID | 508mm&610mm (customer order) |
Coil Weight | Max 25000 kg |
Coil Width | Min 500mm, Max 1600mm |
Coil Thickness | Min1.0mm, Max6.0 mm |
Width Tolerance | ≤0.10mm |
Burr Tolerance | ≤3% thickness |
Slitting running speed | Once 1.0-2.0mm, 0-80m/min Once over 2.0mm, 0-60m/min |
Slitting quantity | 3mm thickness ≤6 piece 2mm thickness ≤15 piece |
Input Power | 380V,50Hz, 3 Phrase |
Electric installed capacity | 300KW |
Floor size | 28×9.5m (length X width) |
Direction of Operation | To be confirmed by buyer |
Slit blade Shaft diameter | 260mm |
Shaft Material | 40Cr forge, tempering, mid frequency headening |
Blade Material | H13 |
Blade Hardness | HRC56-58 |
Post time: Dec-28-2022