Electronic Instrument Box Equipment
Short Description:
Parameters:
(1) Maximum cut section (length×width): 433×16mm
(2) Land size (length×width): 1000mm×800mm
(3) Hydraulic power: 4kw
Receiving table:
Structure: roller type, no power; composed of bed, support, roller shaft, electrical control system
The whole line adopts PLC control, LCD touch screen, and man-machine interface.
Function:
(1) Digital setting of part length.
(2) The length of the parts can be adjusted.
(3) Real-time monitoring of equipment operating status and fault indication.
There are two modes of operation: manual/automatic
In the manual state, it can be operated as a stand-alone machine, which is convenient for maintenance; in the automatic state, the whole line of production operation is carried out, and the sequence starts.
Emergency stop buttons on the whole line, make it easy to handle emergency accidents and ensure the safety of equipment and operators.
Company Information
Decoiler
Coils width: ≤462mm
Material thickness: 0.6mm
Material roll inner diameter: ≥φ450mm
Max.OD Coil: φ1200mm;
Weight: ≤3T
Spindle center height: 650mm
Land size (length x width): 1200x1000mm
Traction and Leveling machine
It consists of a pinch roller and a leveling roller. The pinch roller can be adjusted individually. The feeding end of the leveling machine is equipped with a pair of guiding flat rollers and two pairs of guiding vertical rollers. The guiding vertical rollers can move in the center and move at the same time.
Parameters:
(1) Number of work rolls: 11 rolls leveling
(2) Diameter of leveling roller: 60MM
(3) Distance between leveling rollers: 65MM
NCF-500 Servo Feeder
(1)Function: Measure the length of the workpiece and work requirements for traction, feeding and stamping
(2)Structural features: Two pairs of traction rollers, traction roller reduction adjustment device, frame, servo motor, etc
(3)Servo motor control: Fixed-length feeding
LCD touch screen: easy to change and set various technical parameters.
Parameter:
(1) The maximum passing width of the sheet is 462mm
(2) Feeding method: Servo feeding
(3) Feeding times according to punching times
Punching system
(1) Composed of 4 hydraulic punching machine
(2) Component: Base, hydraulic pressure device, hydraulic system, etc.;
(3) Parameter: ①Rated pressure 16Mpa-25 Mpa
②Power 7.5KW
(4) Function: Complete the logo and hook/cut angle of the 2F board. Complete the logo and hook/cut blanking of the 1F board to provide a sheet for the single-hand plug forming.
Roll forming machine
Machine 1 for Fundo F2: Torii through shaft structure + cantilevered host structure; Complete continuous feeding molding.
Machine 2 for Fundo F1: Torii through shaft structure + cantilevered host structure; Complete single-sheet hand plug feeding forming.
Structure: Quick-change type adjustment mechanism. The bed adopts welded structure and stress relief treatment; the gear adopts 45 steel hard tooth surface;
Features: High strength, high hardness, high precision, high service life.