Electric Cabinet Roll Forming Machine

Short Description:

Decoiler
Coils width: ≤462mm;
Material thickness 0.6mm;
Material roll inner diameter: ≥φ450mm;
Max.OD Coil: φ1200mm; Weight: ≤3T; Spindle center height: 650mm
Land size (length x width) 1200x1000mm
Traction and Leveling machine
Number of work rolls: 11 rolls leveling
It consists of a pinch roller and a leveling roller. The pinch roller can be adjusted individually. The feeding end of the
leveling machine is equipped with a pair of guiding flat rollers and two pairs of guiding vertical rollers. The guiding vertical
rollers can move in the center and move at the same time.
Diameter of leveling roller: 60MM
Distance between leveling rollers: 65MM
NCF-500 Servo Feeder
Function: Measure the length of the workpiece and work requirements for traction, feeding and stamping.
Structural features: Two pairs of traction rollers, traction roller reduction adjustment device, frame, servo motor, etc.;
Servo motor control: Fixed-length feeding;
LCD touch screen: easy to change and set various technical parameters.
Parameter:
(1) The maximum passing width of the sheet is 462mm
(2) Feeding method: Servo feeding
(3) Feeding times according to punching times
Punching system
1. Composed of 4 hydraulic punching machine
2. Component:Base, hydraulic pressure device, hydraulic system, etc.;
3. Parameter: (1) Rated pressure 16Mpa-25 Mpa
(2) Power 7.5KW
4. Function: Complete the logo and hook/cut angle of 2F board.
Complete the logo and hook/cut blanking of the 1F board to provide a sheet for the single hand plug forming.
Roll forming machine
Machine 1 for Fundo F2: Torii through shaft
structure + cantilevered host structure; Complete continuous feeding molding.
Machine 2 for Fundo F1: Torii through shaft structure + cantilevered host structure; Complete single-sheet hand plug feeding
forming.
Structure: Quick-change type adjustment mechanism. The bed adopts welded structure and stress relief treatment; the gear adopts 45
steel hard tooth surface;
High strength, high hardness, high precision, high service life.
Parameters:
(1) Raw material thickness 0.6mm (when σs≤260Mpa)
(2) Raw material width ≤462mm (adjustable)
(3) Forming passes: Forming machine ①: 17 passes; Forming machine ②: 12 passes
(4) Motor power 5.5kw, frequency conversion motor
(5) Transmission mode Gear transmission
(6) Rolling mill speed 0-12m/min
(7) Roll material Cr12 quenched HRC56°-60°
Automatic Hydraulic track cutting machine
Function: Automatically cut and bend the cold-formed profile on-line according to the size requirements.
Stucture:
Cutting head: Cylinder, top plate, column, base plate.
Machine body: Plates, wheels, axles, frame bodies, buffers, base beams, etc.
Parameters:
(1) Maximum cut section (length×width) 433×16mm
(2) Land size (length×width): 1000mm×800mm
(3) Hydraulic power: 4kw
Receiving table
Structure: roller type, no power; composed of bed, support, roller shaft,
Electrical control system
The whole line adopts PLC control, LCD touch
screen, man-machine interface.
Function:
(1) Digital setting of part length.
(2) The length of the parts can be adjusted.
(3) Real-time monitoring of equipment operating status and fault indication.
There are two modes of operation: manual/automatic
In the manual state, it can be operated as a stand-alone machine, which is convenient for maintenance; in the automatic state, the
whole line of production operation is carried out, and the sequence starts
Emergency stop buttons on the whole line, which are easy to handle emergency accidents and ensure the safety of equipment and
operators