Electric cabinet column equipment

Short Description:

Parameters:
(1) Raw material thickness 0.6mm (when σs≤260Mpa)
(2) Raw material width ≤462mm (adjustable)
(3) Forming passes: Forming machine ①: 17 passes; Forming machine ②: 12 passes
(4) Motor power 5.5kw, frequency conversion motor
(5) Transmission mode Gear transmission
(6) Rolling mill speed 0-12m/min
(7) Roll material Cr12 quenched HRC56°-60°
Automatic Hydraulic track cutting machine
Function: Automatically cut and bend the cold-formed profile on-line according to the size requirements.
Stucture:
Cutting head: Cylinder, top plate, column, base plate.
Machine body: Plates, wheels, axles, frame bodies, buffers, base beams, etc.
Parameters:
(1) Maximum cut section (length×width) 433×16mm
(2) Land size (length×width): 1000mm×800mm
(3) Hydraulic power: 4kw
Receiving table
Structure: roller type, no power; composed of bed, support, roller shaft,
Electrical control system
The whole line adopts PLC control, LCD touch
screen, man-machine interface.
Function:
(1) Digital setting of part length.
(2) The length of the parts can be adjusted.
(3) Real-time monitoring of equipment operating status and fault indication.
There are two modes of operation: manual/automatic
In the manual state, it can be operated as a stand-alone machine, which is convenient for maintenance; in the automatic state, the
whole line of production operation is carried out, and the sequence starts
Emergency stop buttons on the whole line, which are easy to handle emergency accidents and ensure the safety of equipment and
operators